If your Sonos speaker is not working as it should, there are a few simple steps you can take to reset it. First, make sure that the speaker is plugged into an outlet and that the power is turned on. Next, press and hold the “play” button for about five seconds until the blue light starts to flash. Finally, release the button and wait a few seconds for the speaker to restart. ..
Open the Sonos app on your mobile device.Go to Settings > System > Network > Wireless Set Up.This will walk you through the process of setting up your new WiFi network.After entering your new WiFi password.You should see a message informing you that your Sonos player has been configured on the new WiFi network.
Make sure that the Ethernet connection is firmly in place between the router and your Sonos device. If at all feasible, connect the Ethernet cable to a different port on the Sonos device or the router. You may also try using a different Ethernet cable to determine whether the current one is faulty.
If your device is not connected to your home WiFi network, go to Settings -> WiFi on your device and make sure it’s linked to your home network. 2. It’s possible that the Sonos controller on your iOS device will need to reconnect to your WiFi network. Go to Settings -> WiFi on your mobile device and switch off
The Sonos product is beginning to boot up after being connected to electricity. The status light will also flash white while it is waiting to establish a connection with the network.
Remove the power cord from the wall. Next, hold down the Play/Pause button. Reconnect the power cable while you’re holding down the button. Continue to press and hold the Play/Pause button until you see amber and white flashes on the light.
